Epygi Quadro M26x Guía de instalación descargar pdf (Pagina 7)

QuadroM8L/M26x Manual I: Installation Guide Hardware Overview

Hardware Overview

The Connectors Panel of QuadroM8L/M26x

The illustration below includes the connector’s panel of QuadroM8L/M26x.

Fig. I-1: QuadroM8L’s Connectors Panel

Fig. I-2: QuadroM26x's Connectors Panel

Fig. I-3: QuadroM8L/M26x's Back Power Panel

1 AUDIO IN connector connects Quadro to the radio or any other audio resource to be

used for the hold music.

2 AUDIO OUT connector is used for Paging service (the feature is currently unavail-

able).

3 The Reset button may be used in two ways: (1) to initiate a normal reset or (2) to

carry out a factory reset. A normal reset is executed by pressing the Reset button

with a paper clip for an instant.

Pressing the reset button and holding it down for seven seconds or more will execute

a factory reset. This will restore the factory defaults and clear all settings including

the IP address and the administration password you entered.

Please Note: A Factory Reset forces the default LAN IP address of 172.30.0.1 and

default admin password of 19.

4 LINE sockets to connect the Quadro to the PSTN network using standard analog

phone service. These are FXO (Foreign Exchange Office) analog ports.

5 PHONE sockets with RJ11 connectors enable connectivity of regular analog tele-

QuadroM8L/M26x; (SW Version 5.2.x) 7

1 2 3 4 5 6 7 8 9 10 11 12 ... 42 43

Sin comentarios

Epygi Quadro M26x Guía de instalación Pagina 7