Epygi QuadroCS SW-Version Guía de instalación descargar pdf (Pagina 25)

QuadroCS Manual II: Administrator's Guide Administrator's Menus

QuadroCS (SW Version 3.1.x) 25

If you have selected “Attendant” on the Conference Wizard –

Page 1 then the second page of the wizard will contain general

information for the new Auto Attendant to be created. In this

case, the Conference Wizard – Page 2 consists of the

following components:

Attendant ID is used to enter a unique ID for the Auto

Attendant. Digits allowed only.

Description is an optional parameter used to insert additional

information about the Auto Attendant.

Percentage of System Memory is used to select the

percentage of total memory space that can be used for

attendant scenario and related voice prompts.

Fig. II-42: Conference Wizard - page 2 – for Auto Attendant

Independent on the extension type selected on the Conference

Wizard – Page 1, the third page of the Conference Wizard –

Page 3 contains conference or attendant related SIP registration

settings:

Registration User Name text field requires a user name for

conference registration on the SIP server. The registration user

name needs to be unique on the SIP server and is used to

reach the conference over the SIP network.

Registration Password is the password for the registration on

the SIP server. It must be confirmed in the Confirm

Registration Password text field.

Registration SIP Server indicates the host address of the SIP

server. The field is not limited regarding symbol usage and

length. It can be either an IP address (ex: 192.168.0.26) or a

host address (ex: sip.epygi.com).

Registration SIP Port indicates the host port number to

connect to the SIP server. The SIP server port may only contain

digit values. If the SIP server port is not specified, the

QuadroCS will access the SIP server through the default port of

5060.

Registration on SIP Server enables the conference ID to be

registered on the SIP server.

Fig. II-43: Conference Wizard – page 3

Edit button opens the Conference Wizard described above with the omitted first page.

Duplicate is used to generate a new conference or Auto Attendant with the settings of an exiting one. To use the Duplicate button only one record

may be selected. Duplicating a conference, all participants, scheduling options, SIP registration settings and other configuration settings are taken

from the original conference. Duplicating an Attendant, SIP registration settings of the original Attendant unit will be used.

Activate is used to activate the selected conference(s).

The Conferences table contains a default entry that is dedicated to the Conference Server Auto Attendant. This entry can't be deleted but its

settings can be modified. To do so, click the corresponding entry in the table and Edit Entry page for the Auto Attendant page will be displayed.

The Conference Attendant page consists of four sub-pages

used to configure the Quadro CS Auto Attendant:

1. General Settings

This page consists of the following components:

Attendant ID text field indicates read-only information about

the Conference Server’s Auto Attendant number.

Description text field is used to insert an optional

description for the Auto Attendant.

Percentage of System Memory is used to select the

percentage of total memory space that can be used for

attendant scenario and related voice prompts.

Fig. II-44: Conference Attendant – General Settings

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 53 54

Comentarios a estos manuales

Sin comentarios

Epygi QuadroCS SW-Version Guía de instalación Pagina 25

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Epygi QuadroCS SW-Version